Customers rate us 9.8 ★★★★★ 1300+ reviews

  • Large selection of

    indoor and outdoor furniture

  • Souren Furniture:

    Family business since 1980

  • Own delivery service:

    Personal and careful

  • Craftsmanship &

    recycled teak

Gluing teak

Teak lijmen - Souren Meubels

Marijn Souren |

A board that comes loose, a loose seat slat or a glue joint that has opened up: on teak furniture you can usually fix this yourself. We use waterproof wood glue of class D4 for this.

Why D4?

Wood glue is divided into four classes of water resistance (D1 to D4, according to the EN 204 standard). D4 is the highest class and suitable for furniture exposed to moisture and changing weather, so also for garden furniture. D4 glue is available at DIY stores.

Which glue do we use?

Griffon / Bison Houtlijm KM45 D4 waterproof – white wood glue

Griffon / Bison Houtlijm KM45 (D4, waterproof) – a white wood glue. This is the one we use most: it is easy to work with, does not foam, dries clear and quickly, and gives neat glue lines. Ideal for loose boards, slats and glue joints in a table top.

Bison Konstruktie-bruislijm D4 waterproof – foaming construction glue

Bison Konstruktie-bruislijm (D4, waterproof) – a construction glue that foams slightly as it cures. Strong and suitable for indoors and outdoors, for example for joints in legs or frames. The foaming does not fill large gaps: the parts must fit together well. Let any foamed-out glue cure, then cut or sand it away.

These are the Dutch product names; comparable D4 wood glues are available at DIY stores in other countries.

Why teak needs extra attention

Teak naturally contains oil. That makes the wood durable, but glue sticks less well to an oily surface. Good preparation is therefore the most important step.

How to glue a loose board or slat

  1. Clean and dry the surfaces to be glued and remove any old glue residue.
  2. Lightly sand the surfaces with fine sandpaper and wipe them with a dry cloth, so they are free of dust and grease.
  3. Apply a thin layer of glue.
  4. Clamp the parts firmly with glue clamps or ratchet straps, so the joint closes well.
  5. Wipe away squeezed-out glue straight away with a damp cloth. Once dry, glue can only be removed by sanding.
  6. Let the glue cure fully as stated on the packaging before you use the furniture again.

Not sure?

Is a leg or frame loose or broken, or are you not sure how to go about it? Send us a photo via WhatsApp (+31 45 549 1317) or our contact form, and we will take a look with you.

NEW CATALOG! 2026-2027

Free catalog

Within a few minutes you will have ordered the catalogue and then we will send it to you by post free of charge.